SouthPaw Mod Tutorials

This is a place for us to post discussion threads to go along with our articles posted on llamma.com. Only moderators can start a new thread here but anyone can reply to one

Moderators: Moderators In Training, Team Llamma, Moderators

SouthPaw Mod Tutorials

Postby Llamma123 » Thu Nov 10, 2005 8:54 pm

Llamma123
Site Admin
 
Posts: 186
Joined: Tue Aug 30, 2005 4:49 pm

buying a ready made southpaw controller s

Postby kingnige » Sat Nov 12, 2005 5:23 am

i have been looking for a southpaw controller for the xbox (and probably now xbox360) as so many games do not provide support for left handed gamers.

I am probably the worst solder in the world, and was wondering whether it is possible to buy a controller that had already been modded.

I have looked on your store, but have been unable to find anything
kingnige
Newbie
 
Posts: 1
Joined: Sat Nov 12, 2005 5:20 am
Location: united kingdom

Postby Llamma123 » Mon Nov 14, 2005 1:21 am

The 360 controller is available pre-modded in our shopping cart
Xbox 360 South Paw Controller

This is a time consuming and dellicate mod to perform. I do not intend to do many of these.

If this is to be a cheap widely availble mod we will need to see a firmware flash uitility of some sort. I've added a 360 Development section there is a [url=http://forums.llamma.com/viewforum.php?f=21]place to discuss ideas like these.
[/url]
Llamma123
Site Admin
 
Posts: 186
Joined: Tue Aug 30, 2005 4:49 pm

FPS Master mod article?

Postby jrspeigel » Sun Nov 20, 2005 9:57 am

Did someone ever post the article on how to mod the FPS Master controller? I love that controller! The accuracy of shot is a little lackluster at times, but you can change the sensitivity depending upon the board. For small boards you can't get any better than the FPS! Too bad it never caught on 'cause I just broke mine and had to buy one off ebay. Thanks.

Jason
jrspeigel
Newbie
 
Posts: 2
Joined: Sun Nov 20, 2005 9:51 am

Postby Llamma123 » Sun Nov 20, 2005 9:31 pm

No he never did finish it.
Llamma123
Site Admin
 
Posts: 186
Joined: Tue Aug 30, 2005 4:49 pm

FPS

Postby jrspeigel » Mon Nov 21, 2005 7:10 pm

Do you know how I could mod it? j.
jrspeigel
Newbie
 
Posts: 2
Joined: Sun Nov 20, 2005 9:51 am

LEGACY mods on s-type controller

Postby jasonmeadows » Wed Nov 23, 2005 4:30 am

Can it be done a legacy thumbstick layout mod on a controller or would it be way to much work or not even possible
jasonmeadows
Newbie
 
Posts: 1
Joined: Wed Nov 23, 2005 4:27 am

Postby coz » Mon Nov 28, 2005 7:37 am

jrspeigel,

check this post. http://forums.llamma.com/viewtopic.php?t=345
I posted how I modded the Gamster FPS there.
coz
Newbie
 
Posts: 4
Joined: Mon Oct 24, 2005 6:15 pm

southpaw question

Postby lewis19 » Fri Feb 10, 2006 4:27 pm

Llama said that the 360 has the option built in for southpaw. I tried this with PDZ and set it to default controls. I changed the setting on the 360 for left handed and it did not work. I'm just worried that some games won't have southpaw options (splinter cell,etc...) Did I do something wrong?
How do I buy a modded controller from Llama? And is anyone interested in modding one for a price? Thanks for your help :D
lewis19
Newbie
 
Posts: 2
Joined: Fri Feb 10, 2006 4:18 pm

Postby desolatordan » Tue Feb 21, 2006 5:03 pm

Is it possible to make a Legacy configuration?

How would the set up be different?
desolatordan
Newbie
 
Posts: 1
Joined: Tue Feb 21, 2006 5:02 pm

Postby RagingRebel » Fri Mar 03, 2006 6:59 pm

Would it be possible to mod a controller to get the trigger functions to be reversed? ( As in a FPS, I need the left trigger to be the primary firing trigger and the right the be secondary firing.)
RagingRebel
Newbie
 
Posts: 1
Joined: Fri Mar 03, 2006 10:38 am

Postby Lice_01 » Fri Mar 03, 2006 7:24 pm

RagingRebel wrote:Would it be possible to mod a controller to get the trigger functions to be reversed? ( As in a FPS, I need the left trigger to be the primary firing trigger and the right the be secondary firing.)


couldn't you just desolder and solder again in new position
Lice_01
Needs laid
 
Posts: 1203
Joined: Thu Dec 08, 2005 2:34 am
Location: Manhattan, New York

Re: SouthPaw Mod Tutorials

Postby Trevlan » Thu Mar 09, 2006 2:35 am

llamma123 wrote:http://llamma.com/xbox/Mods/south_paw_stype.htm

http://www.llamma.com/xbox360/mods/Xbox ... er-Mod.htm

Feel free to discuss here.


That was extremely difficult. Unfortunately, was unable to get it to work. It was very difficult to get the soder to stick to the trace wire even after I scrapped the solder gaurd off.

GRAW doesn't support the lefty settings, and the game defaults in the gamer profile have no affect on the game. Do you still mod the controllers? I would like to purchase one.
Trevlan
Newbie
 
Posts: 1
Joined: Thu Mar 09, 2006 2:23 am

South Paw Controller

Postby Beast Nemesis » Thu Mar 09, 2006 5:50 pm

I also would like to purchase a south paw controller if still available.
Beast Nemesis
Newbie
 
Posts: 2
Joined: Thu Mar 09, 2006 5:49 pm

Postby playboidee » Thu Mar 30, 2006 7:10 pm

Can you do a southpaw swap for the triggers? .. Im a lefty when it comes to shooting. Been looking everywhere.
playboidee
Newbie
 
Posts: 4
Joined: Sun Nov 27, 2005 1:06 pm

Next

Return to Article Discussion

Who is online

Users browsing this forum: No registered users and 0 guests

cron

Fatal error: ./cache/ is NOT writable. in /home/llammaplesk/public_html/forums/includes/acm/acm_file.php on line 109