E80 / 1100 Error help needed

[Sniperhunter]

So the past day ive been reading up on what might have caused my xbox 360 to get the E80 error and 1 RLOD, i've read on numerous posts all over the web that i either removed a resistor (R6T3) or i have the "Wrong LDV version in NAND Flash" or the NXE update detected i didnt have an e-fuse blown and did something to my xbox. I have never take off any resistors from my xbox, the only thing i have done is taken the stock xclamps off and fixed my 3 RLOD by applying a new heatsink, i have aslo flashed my xbox to play back ups, i am not sure what an LDV or NAND flash is and i have had the NXE update since it came out and just got this error yesterday. any ideas?

[Deary65]

Did you recently flash it?

[Sniperhunter]

the last time i flashed it i believe was some time in august and i used the iextreme 1.51 hfw, after hearing about the wave 4 video partitions i was browsing xbins and was going to update to 1.6 but then i got the E80 error screen

[Deary65]

So it just spontaneously happened?
Odd.
Did you update the console recently?

[Sniperhunter]

oh sorry i must have left that part out when it started up my friend said it was asking to update so i told him to go for it and after it restarted then i got the e80, and i've read that when it updates it should blow something called an e-fuse and im thinking it either didnt or couldnt

[Deary65]

The update will probably be the issue then.
Maybe download an older version?

[Sniperhunter]

im not to familiar with downgrading the 360, but if its gonna be the solution then i'd like to find where to read up on this

[Deary65]

Personally, I don't know how and even if it's possible.
Look at "Llamma Error Codes and....." at the "Failed Update (or similar)" bit and download some older versions.
Might work.

[CVX]

You can start here:

http://dl.console.se/index.php?dir=Xbox ... ateringar/

[Sniperhunter]

alright i'll give the failed update disc method a try, ive already tried the sync button to clear failed data caches and that didnt work, and since all i get is the E80 screen i cant navigate around my dash to find the system tab for the reset method =[

[Sniperhunter]

well i tried the failed patch method and no success but i figure i'll try to flash my xbox to the latest hfw version and hopefully it could solve the problem, thanks for the all the help and quick responses =] hopefully i'll get this box working again before november 10th if you get what i mean

[CVX]

Can't wait until the 10th .....Let's get your box FIXED

http://news.cnet.com/8301-13506_3-10387138-17.html

[gzetski]

Unplug the dvd and see if you still get that error. If you blew and e-fuse, you may need to do a NAND dump and find the cpu key to get that straightened out. here is a start : http://forums.xbox-scene.com/index.php?showtopic=690640&st=15 and more reading in this thread : http://forums.llamma.com/viewtopic.php?f=18&t=29252

Have fun!

[Sniperhunter]

well took a quick glance into what you had to offer gzetski and well it looks pretty complicated but i guess it'll be worth the try and its gonna take a loong time lol